LED Packaging Equipments:

• WT-2330 Gold Ball Ultrasonic Welder

• Used for wire bonding in LED packaging

• TRY 1080 Desktop Lead-free Reflow Welding Machine

• Used for LED bonding

• XYZ-06 LED Suction Chamber

• Used to pump bubbles inside silicone gel in LED packaging

• HKD-220DJ Super Precision Dispenser

• Used to dispense epoxy resin on LED chip in packaging

• 0.5mm minimum dispensing diameter

• LS·VO20 Vacuum Oven

• Used for vacuum and heating

• Mecular pump

• Used to get high vacuum

LED Test Equipments:

• HEO-200 LED Thermal Analysis System for LEDs

• Used to measure LEDs’ thermal resistance, junction temperature and electrical parameters timely and precisely

• T3Ster Junction Temperature Tester

• Used for junction temperature test for LED or high power electronics

• LED 620 Luminous Intensity Distribution Tester

• Used for LED luminous intensity distribution test

• ATA-1000 Auto-temperatured LED Opto-electonic Analyzer

• Used for LED lumunous intensity test under selected temperature

• Fluorescence Spectrometer
  

• Used for  measurement of  exciation and emission spectrum of fluorescence materials
  

Fluid and Thermal Test Equipments:

• FLIR SC620 Portable Thermal Infrared Imager

• Used for temperature test

• Photron FastCam SA2

• Used to capture a variety of high speed phenomenon.

• Up to 12,000 frames per second

• HFM-4B Heat Flux Meter

• Used for heat flux test

• Operates at -180~200℃, ranges from 0 to 7000W/m²

• Keithley 2700 Multimeter Data Acquisition System

• Used for data acquisition

• TC3000 Thermal Conductivity Tester

• Used for thermal conductivity test

• SJ400 Surface Roughometer

• Used for surface roughness test

• CAP 2000+ Viscometer

• Used for fluid viscosity test

• KRUSS Contact Angle Meter

• Used for fluid's contact angle measurement

• Laser Conductometer LFA467

• Used for thermal diffusion coefficient and thermal conductivity test

• Temperature Range: -100℃~500℃
  Thermal conductivity Range：0.1 ~2000 W/(mK)
  

   

• Rotational Rheometer MCR302

• Used for testing the basic physical properties of fluid, such as viscosity

Other Equipments:

• CK-300 Microscope

• Used to observe the microstructures

• Micropump Integrated Test platform

• Used for micropump R&D and hydraulic performance test

• LED Online Thermal Reliability Testing System

• Used for in-situ measurement of LED's optical degradation under accelerated life test

• DELL PowerEdge R720 Server

• Used for research calculation and analysis

• Cincinnati Sub-Zero MCB-1.2 Temperature Chamber

• Used for LED and micropump reliability test